DESCRIPTION
The thin, one-piece, rimless frame is very light (118 g) and brings the lenses surprisingly close to the eyes, with consequent advantages in terms of visibility and reduction of internal volume.
The assembly of the mask is exclusive and integrates the frames and the structure inside the facepiece. This system improves the tightness of the mask, eliminates any possibility of uncomfortable contact of the frame with the forehead and eliminates any view of the central area of the frame from the inside.
Its facepiece optimises dead spaces and reduces the internal volume to only 85 cm³. The distance between the glass and the face has been reduced to such an extent that the facepiece does not have the well-known suction effect, but simply sits on the face, providing an optimum seal thanks to its design and the carefully studied thickness/level of rigidity of the silicone.
A subtle silicone membrane around the nose acts as a deflector so that warm air from the nose to compensate for outside pressure is not directed directly at the lenses, reducing the tendency for fogging that is common in small volume masks.
Sloping lenses that extend with gently curved lines above the cheekbones, improving visibility below. The very thin frame and the carefully studied fit with the delicate area of the frontal bone optimise upper visibility without compromising the ability to adapt.
The buckles, anchored to the frame for optimal stability of the mask and a tension always to be determined by the user, are completely foldable and tiltable in all directions. Therefore the possibility of breakage is almost impossible. This type of anchoring also improves the stability of the mask, as the tension of the strap is on a rigid element and the movements of the tube do not affect the facepiece.